Campbell WindSonic, Руководство по эксплуатации продукта

Страница: 11 / 30

Table 7-2: Wire color, function, and connections to SDM-SIO1A/SDM-SIO4A and data logger
Description
WindSonic1
wire color
SDM-SIO1A/
SDM-SIO4A
terminal
Data logger
terminal
WindSonic RxD Green TX-Z
WindSonic TxD White RX-A
Power Red +12V 12V
Serial/
power reference
Black G
Shield Clear G
SDM data enable line C1
C (control terminal) or U terminal
configured for SDM enable
1
SDM clock line C2
C (control terminal) or U terminal
configured for SDM clock
1
SDM data line C3
C (control terminal) or U terminal
configured for SDM data
1
1
U and C terminals are automatically configured by the measurement instruction for Campbell Scientific CR6 data
logger.
7.3 Data logger programming
Short Cut is the best source for up-to-date programming code for Campbell Scientific data
loggers. If your data acquisition requirements are simple, you can probably create and maintain a
data logger program exclusively with
Short Cut . If your data acquisition needs are more complex,
the files that Short Cut creates are a great source for programming code to start a new program
or add to an existing custom program.
NOTE:
Short Cut cannot edit programs after they are imported and edited in CRBasic Editor .
A Short Cut tutorial is available in QuickStart (p. 2). If you wish to import Short Cut code into
CRBasic Editor to create or add to a customized program, follow the procedure in Importing
Short Cut code into CRBasic Editor (p. 16). Programming basics for CRBasic data loggers are
provided in the following section. Downloadable example programs are available at
www.campbellsci.com/downloads/windsonic1-program-examples .
WindSonic1 Two-Dimensional Sonic Anemometer 8