Campbell WindSonic, Руководство по эксплуатации продукта

Страница: 5 / 30

3. Initial inspection
l
Upon receipt of the WindSonic1, inspect the packaging and contents for damage. File
damage claims with the shipping company. Immediately check package contents against
the shipping documentation. Contact Campbell Scientific about any discrepancies.
l
The model number and cable length are printed on a label at the connection end of the
cable. Check this information against the shipping documents to ensure the expected
product and cable length are received.
4. QuickStart
A video that describes data logger programming using Short Cut is available at:
www.campbellsci.com/videos/cr1000x-data logger-getting-started-program-part-3 . Short
Cut is an easy way to program your data logger to measure the sensor and assign data logger
wiring terminals. Short Cut is available as a download on www.campbellsci.com . It is included
in installations of LoggerNet , RTDAQ , and PC400 .
The following procedure also shows using Short Cut to program the WindSonic1.
1. Open Short Cut and click Create New Program.
2. Double-click the data logger model.
WindSonic1 Two-Dimensional Sonic Anemometer 2