1. Introduction
Designed around Campbell Scientific’s VSPECT™ measurement technology, the VWIRE 305
Dynamic Vibrating Wire VSPECT Analyzers measure vibrating wire sensors at rates up to 333.3 Hz
with high accuracy. You can use an analyzer without a data logger in a bench test, or one or
more analyzers with a Campbell Scientific data logger in a field installation.
This manual discusses the use of the VWIRE 305 with the following products, which are sold
separately:
l
Wall Charger 12 VDC 800 mA Output, 100-240 VAC
l
CPI Network Kit
l
GRANITE data logger
l
LoggerNet data logger support software
2. Precautions
l
READ AND UNDERSTAND the
(p. 1) section at the front of this manual.
l
WARNING:
o
Protect from over-voltage
o
Protect from water
o
Protect from ESD (electrostatic discharge)
l
IMPORTANT: Maintain a level of calibration appropriate to the application. Campbell
Scientific recommends factory recalibration of the VWIRE 305 every three years.
3. Initial inspection
l
The VWIRE 305 ships with the following:
o
GRANITE Parts Kit (1)
l
Inspect the packaging and contents for damage immediately. File damage claims with the
shipping company.
VWIRE 305
1
