Section 3. Developing the Voice Image File
3-4
3.3.1 Building the Voice Image File
Begin by selecting the “New” icon (picture of a sheet of paper). This will open
a new file and the “Add Phrase” window will appear. In this window you enter
the text you want spoken before and after the data values. You can also select
settings for how the data will be spoken. This is done by selecting the box to
the right of the option. If you choose to have the decimal spoken, then you can
also set how many decimal points you want spoken. When you are done select
“Add”. This will save the first text string, clear the text boxes, and increment
to the second data value.
The value corresponds to the order of the input locations that will
be sent from the datalogger to the Vosponder. In our previous
programming Example 2-1 the input locations that we
programmed the datalogger to send to the Vosponder were in the
order of battery voltage, datalogger temperature, and time. The
battery voltage would be Value1, datalogger temperature would
be Value2, and time would be Value3.
Using our example data values we would enter the following text. In the
Beginning field type in “Beaver Creek Site 31..Battery voltage is" then move to
the End field and type “Volts..”.
We would then enter the two other text strings in a similar manner. Note that
we have added two periods after the end of each sentence. This helps to clearly
separate each sentence from each other. After you have added your final text
string, select “Close” from the “Add Phrase” window. You see the main
screen with a line of text for each data value you want to have spoken.
NOTE
Содержание Vospoder
