Campbell TDR200, Инструкция по эксплуатации

Страница: 49 / 53

Appendix D. Terminal Commands
D-4
SDI – Set Distance
Usage: SDI[space][value]\r\n – range of value = [-2.0 – 3822.0]
Response: \r\n>[space]SDI
SWL – Set Window Length
Usage: SWL[space][value]\r\n – range of value = [0.0 – 3824.0]
Response: \r\n>[space]SWL
SPL – Set Probe Length
Usage: SPL[space][value]\r\n – range of value = [0.0 – 10.0]
Response: \r\n>[space]SPL
SPO – Set Probe Offset
Usage: SPO[space][value]\r\n – range of value = [0.0 – 0.50]
Response: \r\n>[space]SPO
SCC – Set Probe Cell Constant
Usage: SCC[space][value]\r\n
Response: \r\n>[space]SCC
SREJ – Set 50/60 Hz Rejection
Usage: SREJ[space][value]\r\n – range of value = [0,50,60]
Response: \r\n>[space]SREJ
SFIL – Set Filter Level
Usage: SFIL[space][value]\r\n – range of value = [0 – 10]
Response: \r\n>[space]SFIL
SLAA – Set Length Apparent Algorithm
Usage: SLAA[space][value]\r\n – range of value = [0 - 2]
Response: \r\n>[space]SLAA
SMUX – Set SDMX50 channel
Usage: SMUX[space][value]\r\n – value = (address[1 to 15]*10) +
channel[1 to 8]
Response: \r\n>[space]SMUX
SDEF – Set Measurement Parameters to Defaults
Usage: SDEF\r\n
Response:
\r\nSetup has been configured as follows:
\r\n Vp = [vp value]
\r\n Ave = [number of averages value]
\r\n Points = [number of points value]
\r\n Distance (Cable Length) = [cable length value]
\r\n Window Length = [window length value]
\r\n Probe Length = [probe length value]
\r\n Probe Offset = [probe offset value]
\r\n Probe Cell Constant = [probe cell constant value]
\r\n 50/60 Hz Rejection = [rejection Hz value]
\r\n Filter Level = [filter level value]
\r\n Length Apparent Algorithm = [LAA value]
Each line containing a value has an appropriate number of space
characters to ensure that 26 total characters are between the ‘\n’
character and the ‘=’ character.
NOTE