Campbell RF451, Руководство по эксплуатации продукта, Страница: 43 / 48

Table B-3: RF451/RF452 settings for Computer-to-RF network with parallel repeaters (using
SubNet ID)
Gateway Repeater Endpoint/repeater
Endpoint 11,
12 etc.
Endpoint 21,
22 etc.
Radio
Operation
Mode
Gateway Repeater Endpoint/Repeater Endpoint Endpoint
Repeaters
Used
Yes; select box
Yes; select
box
Yes; select box
Yes; select
box
Yes; select
box
Network
ID
1
1726 1726 1726 1726 1726
Frequency
Key
1
1 1 1 1 1
Receive
SubNet ID
NA 0 0 1 2
Transmit
SubNet ID
15 (default) 1 2 0 0
Radio ID
4094
2
2 33
11, 12 etc.
3
21, 22, etc.
3
1
Your Network ID and Frequency Key may be different
2
To match LoggerNet PakBus address
3
To match data logger PakBus address
4
Not inclusive; other typical hardware items may include power supply, antenna, enclosure, etc.
NA = not applicable
TIP:
The Radio ID setting allows a transceiver to be designated an arbitrary, user-selectable, 4-
digit number which identifies the transceiver in diagnostics mode. When used in conjunction
with PakBus data loggers, we recommend this setting be assigned the PakBus address of the
station. This is because the Radio ID appears in the Network Diagnostics application within
the FreeWave Tool Suite software, and it allows the user to associate a particular data logger
with its attached radio.
RF451/RF452 Spread Spectrum Radio 37