Campbell HydroSense II Series, Руководство по эксплуатации продукта

Страница: 33 / 50

HS2 and HS2P
21
To create a new zone, select YES and press . To exit without storing, press
.
When a new zone is created, the following screen is displayed.
Use the buttons to select the radius to use for this zone and press
to save the new zone details. Press to return to the main screen
(p. 15)
without creating a new zone and without storing data.
Once a zone is created, the water content data will be stored. By default the
zone name will be in the form “Zone xxxxx” where xxxxx is a number that
automatically increases each time a new zone is created. Zones can be renamed
and updated using HydroSense II Support Software.
If the button is pressed when the GPS does not have a valid GPS sync, a
warning message is display.
This message warns that the current measurement may not be stored with an
accurate date or time. To continue and store data without GPS information,
press
. To return to the main screen
(p. 15)
without storing, press .