Campbell HydroSense II Series, Руководство по эксплуатации продукта

Страница: 17 / 50

HS2 and HS2P
5
The HydroSense II has these default power saving features:
•
turns off when idle for a configurable period
•
adjustable backlight brightness and on-time
• backlight automatically disabled in bright conditions
• GPS and Bluetooth can each be forced off.
The HydroSense II system consists of the items listed in TABLE 4-2 ,
HydroSense II Parts.
These parts are shown in FIGURE 4-1 ,
HS2 Parts in
Hard Carrying Case , FIGURE 4-2 , HS2P Carrying Tote , and FIGURE 4-3 ,
HS2P Parts .
TABLE 4-2. HydroSense II Parts
Qty HS2 Part HS2P Part
1 HydroSense II measurement and display unit
1 HS2P Insertion Pole
Assembly (pn # 29153)
1
CS658 (20 cm) or CS659
(12 cm) water content sensor
CS658P (20 cm) or CS659P
(12 cm) water content sensor
4 AA batteries (factory installed inside the display)
1 Spare battery holder (pn # 28404); spare batteries not included
1 Wrench (pn # 26156) for installing / replacing rods
1 Loctite thread locking compound (pn # 13665) for rod replacement
1 Phillips screwdriver (pn # 6290)
1 Hard carrying case (pn # 27789) Carrying tote (pn # 29468) or
hard carrying case (pn # 27789)
1 HydroSense II Support Software (HydroSoft) on CD