Campbell HMP60, Руководство по эксплуатации продукта

Страница: 8 / 24

Typical accuracy
from 0 to 40 °C:
±3% RH over 0 to 90%
±5% RH over 90 to 100%
Typical Accuracy
from –40 to 0 °C
and 40 to 60 °C:
±5% RH over 0 to 90%
±7% RH over 90 to 100%
7. Installation
If you are programming your data logger with Short Cut , skip Wiring to data logger (p. 6) and
Data logger programming (p. 7). Short Cut does this work for you. See QuickStart (p. 2) for a
Short Cut tutorial.
7.1 Wiring to data logger
CAUTION:
Always connect the blue wire to the data logger first, followed by the black, white, and clear
wires. Connect the brown (power) wire last.
Table 7-1: Wire color, function, and data logger connection
Wire color Wire function Data logger connection terminal
Black Temperature signal
U configured for single-ended analog input
1
,
SE (single-ended, analog-voltage input)
White Relative humidity signal
U configured for single-ended analog input,
SE
Blue
Power ground and
signal reference
G
Brown Power 12V or SW12
Clear EMF Shield ⏚ (analog ground)
1
U terminals are automatically configured by the measurement instruction.
HMP60 Temperature and Relative Humidity Probe 6