background image

Warranty 

“PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are 
warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in 
materials and workmanship under normal use and service for twelve (12) 
months from date of shipment unless otherwise specified in the corresponding 
Campbell pricelist or product manual.  Products not manufactured, but that are 
re-sold by Campbell, are warranted only to the limits extended by the original 
manufacturer.  Batteries, fine-wire thermocouples, desiccant, and other 
consumables have no warranty.  Campbell's obligation under this warranty is 
limited to repairing or replacing (at Campbell's option) defective products, 
which shall be the sole and exclusive remedy under this warranty.  The 
customer shall assume all costs of removing, reinstalling, and shipping 
defective products to Campbell.  Campbell will return such products by surface 
carrier prepaid within the continental United States of America.  To all other 
locations, Campbell will return such products best way CIP (Port of Entry) 
INCOTERM® 2010, prepaid.  This warranty shall not apply to any products 
which have been subjected to modification, misuse, neglect, improper service, 
accidents of nature, or shipping damage.  This warranty is in lieu of all other 
warranties, expressed or implied.  The warranty for installation services 
performed by Campbell such as programming to customer specifications, 
electrical connections to products manufactured by Campbell, and product 
specific training, is part of Campbell’s product warranty.  CAMPBELL 
EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE.  Campbell is not liable for any special, indirect, 
incidental, and/or consequential damages.” 

 

Содержание HFP01



















Отзывы: