ET107 Weather Station
40
6.
Use the 2.125 stainless steel U-bolt to attach the adjustable angle mounting
bracket to the pole. Depending on the size of the antenna, position the
bracket directly below, or above, the enclosure top mounting bracket. The
top of an omnidirectional antenna should not be higher than the top of the
lightning rod.
a.
Slide the U-bolt behind the pole and through the oval notches on the
adjustable angle mounting bracket (FIGURE
).
FIGURE 5-31. Slide antenna bracket U-bolt around back of the pole
b.
Put a flat washer, lock washer, and a silicon bronze nut, in that order,
on the ends of the U-bolt (FIGURE
).
c.
Tighten the nuts finger tight to allow the angle bracket to rotate
around the pole.
FIGURE 5-32. Antenna bracket mounted to pole
