Campbell ET106, Инструкция по эксплуатации

Страница: 43 / 52

5-1
Section 5. ET Software Installation
The ET Evapotranspiration Stations are supported by PC120 "ETPro" for MS-DOS.
ETPro is used to write and download the station program, and to retrieve and report data.
ETPro works in conjunction with PC208 Datalogger Support Software. PC120 and
PC208 each have their own manual, which should be consulted for installation procedures
and operational details.
5.1 Quick Start Review
1) Start PC120 by entering "ET" at the DOS prompt (refer to the PC120
manual).
2) Create the ET datalogger program by clicking your mouse cursor on the
main screen "Edit," then on "Create Station Program" (Edit | Create Station
Program). Follow the prompts until you return to the main screen.
3) Click on "Edit | Communications Param." to set up the PC-to-ET
telecommunications link. Check the link by attempting to set the clock
(Maintenance | Set Clock).
4) Download the program by selecting "Maintenance | Download Station
Prog."
5) After at least an hour, retrieve data from the ET datalogger to a comma
delimited ASCII file called WEATHER.DAT by selecting "Data | Collect
Data."
6) Weather reports can be generated by selecting "Reports | Hourly
Summary" or "Reports | Daily Summary."