Appendix D. Default Programs
A-3
Figure A-4. #15909 Jumper installation
3.
Mount the DIN-Rail bracket onto the enclosure backplate using two #505
screws and two #6044 grommets (see Figure A-5).
The 006706 includes three screws and three grommets. Use the third
screw and grommet to secure the 9-pin DIN-Rail at its centre.
Figure A-5. DIN-Rail bracket mounted onto an enclosure backplate
4.
Connect the wires to the terminals (see Figure A-6 and Figure A-7). The
#8125 flat-bladed screwdriver is used to open the terminals’ guillotines for
wire entry.
NOTE
