ENC 8/10, ENC 10/12, ENC 12/14, ENC 14/16, ENC 16/18 and AM-ENC/ENCT Enclosures
2
Some peripherals need adaptor plates for these enclosures. The
adaptor plates are not always supplied with the peripheral. Please
contact Campbell Scientific if you experience any problems.
Only one small peripheral can be fitted into the ENC 10/12 enclosure. The ENC
12/14 will take the majority of peripherals including an AM16/32, for which there
are two extra mounting holes in the lower half of the grid of holes.
Figure 2-1 ENC 12/14 fitted with a power supply, logger and multiplexer
The AM-ENC enclosure will accept up to two AM16/32s or one older (now
superseded) AM416 multiplexer.
If installing the DIN-Rail Terminal Kit (010211), follow the procedure described
in Appendix A. The 006706-002 kit facilitates wiring when many wires need to be
connected to one terminal.
3. Power Supplies
The enclosures are designed to accept the PS100E, PS17E or PS24E power
supplies. These should be mounted as described above.
Do not ship the enclosure with the large lead acid batteries
installed inside without adequate internal packing, as there is
a risk that the batteries might break loose and cause serious
damage to other peripherals.
NOTE
CAUTION
