Campbell CM10, Инструкция по эксплуатации

Страница: 7 / 68

Section 1. Preparation and Siting
1.1 Installation Tasks
1.1.1 Indoors
•
Immediately upon receipt of your shipment…
⇒
Open shipping cartons.
⇒
Check contents against invoice. Contact CSI immediately about any
shortages.
•
Several days prior to the planned installation date…
⇒
Collect tools and site information (Section 1)
⇒
Assemble datalogger, communications device, and power supply in
enclosure (Section 3)
⇒
Install datalogger support software on PC (Section 5)
⇒
Establish communications between the datalogger and the PC
(Section 5)
⇒
Program datalogger, test sensors, and retrieve data (Section 5)
⇒
Trial run the tripod installation, assembling as much as possible
(Section 2)
⇒
Repackage equipment for transport to the field site
1.1.2 Outdoors
•
Locate suitable site (Section 1)
•
Prepare tower or tripod base (Section 2)
•
Raise tripod (Section 2)
•
Install instrumentation enclosure (Section 3)
•
Install sensors (Section 4)
1-1