A-1
Appendix A. DIN rail terminal kits
A.1 Introduction
The 006706-002 (5-inch) or #28532 (9-inch) kit can facilitate wiring when many
wires need to be connected to one terminal. The kit contains one #15906 5-inch
DIN-Rail (or one #28531 9-inch DIN-Rail) Mounting Bracket, #505 screws,
#6044 grommets, and #15908 DIN-Rail Stoppers. A complete configuration will
also include pn #15920 Terminal Strips, pn #15907 End Plates, and pn #15909
Jumpers. The stoppers, terminal strips, and end plates are mounted onto the DIN-
Rail bracket. The DIN-Rail bracket is mounted to an enclosure backplate using
the kit’s screws and grommets.
One #15920 terminal strip consists of three spring-loaded “guillotine” terminals
that provide connection points for individual wires. Up to 20 of these terminal
strips may be fastened to the 006706-002 DIN-Rail bracket. The 006706 DIN-
Rail bracket holds up to 36. The #15907 End Plates separate the terminal strips.
The #15909 Jumpers are used to electrically connect the terminals. A stopper
needs to be on each end of the terminal strip assembly.
A.2 Installation Procedure
1.
Mount the #15908 DIN-Rail Stoppers, #15920 Terminal Strips, and #15907
End Plates onto the DIN-Rail Bracket (see Figure A-1 through Figure A-3).
Figure A-1. #15908 DIN-Rail Stopper installation
