Campbell 03002, Инструкция по эксплуатации

Страница: 20 / 39

R.M. Young Wind Sentry
11
FIGURE 7-5. The CM216 allows an 03002 or 03101 to mount atop the
mast of a CM106B, CM110, CM115, or CM120 tripod
7.2.4 Mounting the 03301 Vane
The 03301 wind vane has three mounting options
• No Mounting (option –NM) is used when the 03301 will be replacing
an existing 03301 within a Wind Sentry Set.
•
Pipe Offset Mount (option –P) is used when the 03301 will be
deployed on its own next to an anemometer that already has its own
mount. With this option, the 03301 mounts to a crossarm using the
CM220 mount or 3/4 x 1 inch Nu-Rail fitting.
•
03101 Conversion Kit (option –SM) is used when the 03301 will be
mounted next to a previously purchased 03101 Anemometer (Wind
Sentry Anemometer). This conversion kit includes the crossarm and
other hardware to mount both sensors to a common crossarm as if
they had been purchased originally as a complete Wind Sentry Set.
7.3 Wiring
Connections to CRBasic dataloggers are given in TABLE 7-1 and TABLE 7-2 .
To wire an Edlog datalogger, see an older manual at
www.campbellsci.com/old-manuals
.
Fits in Mast