![background image](http://html1.mh-extra.com/html/campbell-hausfeld/in470300av/in470300av_product-manual_490012013.webp)
13
PW4035
Notes
www.chpower.com
troubleshooting Chart - Gasoline Powered Pressure Washers Only
Symptom
Possible Cause(s)
Corrective Action
Pump noisy / pump runs
rough
1 . Pump drawing in air/low water
supply
2 . Valves dirty or worn
3 . Worn bearings
4 . Water too hot
1 . Ensure fittings are tight . Increase water pressure
2 . Check, clean or replace
3 . Check and replace
4 . Reduce temperature below 100ºF
Pressure washer will not
spray detergent
1 . Not using soap tip
2 . Clog, kink, or hole in detergent
suction hose
3 . Hose length too long
4 . Lance not functioning properly
1 . Install 65 degree (black) soap tip
2 . If clean, unkink or replace hose .
3. Use only hose length provided with initial purchase of
pressure washer . Detergent suction will not function if
more than one section of hose is attached to unit .
4 . Remove lance from gun . If detergent is dispensed
through gun, the lance must be replaced . If no
detergent is dispensed through gun, remove 1”
tapered detergent barb from pump . Clean the barb,
and make sure that ball and spring are properly
aligned with tapered portion of the spring facing the
ball . The ball should be on top of the spring .