19
DG480000CK
Notes
Notes
Notas
General Safety
Information
(Cont’d.)
10. Do not put hands near or under
moving parts.
Check
sanding
pad for cracks and wear prior to use.
Replace if damaged. A damaged pad
can break apart during use and cause
serious injury.
11. Ensure sandpaper is fully sealed
onto sanding pad and that pad is
securely tightened to tool spindle.
General Power Tool
Safety Warnings
Read all
safety
warnings and all instructions. Failure
to follow the warnings and instruc-
tions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cord-
less) power tool.
WORK AREA SAFETY
Keep
work
area clean and well lit. Cluttered or
dark areas invite accidents.
Do not
operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases
or dust. Power tools create
sparks which may ignite the
dust or fumes.
Keep
children and bystanders away while
operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
2
Operating Instructions
If an extension cord must be used,
make sure:
• That the pins on plug of
extension cord are the same
number, size and shape as those
of plug.
• That the extension cord is
properly wired and in good
electrical condition.
• If an extension cord is to be used
outdoors it must be marked with
the suffix “W-A” or “W”
following the cord type
designation to indicate it is
acceptable for outdoor use. For
example – SJTW-A
3. Do not expose to rain, snow or
frost.
PERSONAL SAFETY
Stay
alert,
watch what you are doing and use
common sense when operating a
power tool. Do not use a power tool
while you are tired or under the influ-
ence of drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious per-
sonal injury.
Use personal protective
equipment. Always wear eye
protection. Protective equip-
ment such as dust mask, non-
skid safety shoes, hard hat,
or hearing protection used
for appropriate conditions will reduce
personal injuries.
Prevent
uninten-
tional starting. Ensure the switch is in
the off-position before connecting to
power source and/or battery pack, pick-
ing up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
Remove
any
adjusting key or wrench before turning
the power tool on. A wrench or a key
left attached to a rotating part of the
power tool may result in personal
injury.
Avoid
body
contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges
and refrigerators. There is an increased
risk of electric shock if your body is
earthed or grounded.
Do not
expose
power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
Do not
abuse
the cord. Never use the cord for carry-
ing, pulling or unplugging the power
tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged
or entangled cords increase the risk of
electric shock.
When
operat-
ing a power tool outdoors, use an
extension cord suitable for outdoor
use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
If operat-
ing a
power tool in a damp location is
unavoidable, use a residual current
device (GFCI) protected supply. Use of
a GFCI reduces the risk of electric
shock.
Hold
power
tools by insulated gripping surfaces
when performing an operation where
the cutting tool may contact hidden
wiring or its own cord. Contact with a
“live” wire will make exposed metal
parts of the tool “live” and shock the
operator.
Double insulated tools are equiped with
a polarized plug (one plug blade is wider
that the other). This plug will fit in a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
turn the plug over and insert into plug
again.
1. Make sure cord is located so that it
will not be stepped on, tripped
over, or otherwise subjected to
damage or stress.
2. Do not use an extension cord unless
absolutely necessary. Use of
improper extension cord could
result in a risk of fire and electric
shock.
www.chpower.com
Length of Cord in Feet
25 50 100
150
AWG Size of Cord
18 18 18 16
Minimum Wire Size (AWG) of Extension Cord
