Safety Guidelines
This manual contains
information that is very
important to know and
understand. This information
is provided for SAFETY and
to PREVENT EQUIPMENT
PROBLEMS. To help recognize
this information, observe the
following symbols.
Danger
indicates an
imminently hazardous situation
which, if not avoided, WILL result
in death or serious injury.
Warning
indicates a
potentially hazardous situation
which, if not avoided, COULD
result in death or serious injury.
Caution
indicates a
potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
Notice
indicates
important information, that if not
followed, may cause damage to
equipment.
NoTe:
Information that
requires special attention.
Safety Symbols
The following Safety Symbols
appear throughout this manual
to alert you to important safety
hazards and precautions.
Important Safety Information
INStruCtIoNS PertaININg to a rISk oF FIre, eleCtrIC SHoCk, or
INjury to PerSoNS
This manual contains important safety, operational and maintenance information. If
you have any questions, please call 1-800-543-6400 for customer assistance.
When using tools, basic precautions should always be followed,
including the following:
CalIForNIa ProPoSItIoN 65
This product or its power cord may contain chemicals known to the State
of California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling.
You can create dust when you cut, sand, drill or grind
materials such as wood, paint, metal, concrete, cement, or
other masonry. This dust often contains chemicals known to cause cancer, birth
defects, or other reproductive harm. Wear protective gear.
geNeral
a.
To reduce the risks of electric shock, fire, and injury to persons, read
all the instructions before using the tool. Failure to follow warnings,
dangers, and cautions could result in DeATH or SeRIoUS INJURY.
b. Be thoroughly familiar with the controls and the proper use of the
equipment. Follow all instructions. Contact your Campbell Hausfeld representative
if you have any questions.
c. Only persons well acquainted with these rules of safe operation should be allowed
to use the unit.
Do not operate or allow anyone else to operate the tool if any warnings
or warning labels are not legible. Warnings or warning labels are located
on the tool magazine and body.
Always assume the tool contains fasteners. Respect the tool as a working
implement; no horseplay. Always keep others at a safe distance from the
work area in case of accidental discharge of fasteners. Do not point the tool toward yourself
or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in
death or serious personal injury.
Do not make any modifications to the tool without first obtaining
written approval from Campbell Hausfeld. Do not use the tool if any
shields or guards are removed or altered. Do not use the tool as a hammer. Personal injury or
tool damage may occur.
Clean and check all air supply hoses and fittings before connecting the
tool to an air supply. Replace any damaged or worn hoses or fittings. Tool
performance or durability may be reduced.
Work area
a.
Keep the work area clean and well lighted.
Cluttered benches and dark areas
increase the risks of electric shock, fire, and injury to persons.
b.
Do not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
The tool is able to create
sparks resulting in the ignition of the dust or fumes.
c.
Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
Operating Instructions and Parts Manual
www.chpower.com
Risk of
Personal
Injury
Risk of Fire
Wear Eye
and Mask
Protection
Read Manual
First
Risk of
Explosion
Risk of Falling
Wear Eye
Protection
Wear Hearing
Protection
Risk of Shock
CHN71600
4
