__
2
__
3. Attach the material hose to the hose connector.
Attach the opposite end of the material hose to the
gun (See Figure 6).
NOTE:
DO NOT
cover the hole in the hose connector
for dry blasting. For use with liquids, slip the material
hose fully on the hose connector covering the hole.
4. Attach the air compressor hose to the opening at the
bottom of the gun handle. An optional 1/4" NPT
quick connector (MP2468) and coupler (MP2883)
can be used to attach the hose to the gun.
IN241900AV
Specifications
HOPPER
MAXIMUM
HP
MINIMUM
MODEL
NOZZLE
CAPACITY
PSI
REQUIRED
CFM
AT125102AJ
Ceramic
30 lbs
125
1 or more
2.2 @ 40 PSI
AT121002AJ
Ceramic
60 lbs
125
2 or more
2.2 @ 40 PSI
AT121102AJ
Ceramic
120 lbs
125
2 or more
2.2 @ 40 PSI
MODELS AT125102AJ, AT121002AJ AND AT121102AJ
DO NOT
COVER
THIS HOLE FOR
DRY BLASTING
ATTACH
AIR
HOSE
CONDUIT
NUT
HOSE
CONNECTOR
MATERIAL
HOSE
DO NOT
COVER
THIS HOLE
FOR DRY BLASTING
HOSE
CONNECTOR
CONDUIT
NUT
ATTACH
AIR
HOSE
WHEEL
CAP
PROTRUDING
HUB
MATERIAL
HOSE
Figure 5
_
Model AT121002AJ - 60 LBS
Assembly
HOSE CONNECT ASSEMBLY FOR
MODEL AT125102AJ - 30 LBS
1. Attach the material hose to the hose connector.
Attach the opposite end of the material hose to the
gun (See Figure 4).
NOTE:
DO NOT
cover the hole in the hose connector
for dry blasting. For use with liquids, slip the material
hose fully on the hose connector covering the hole.
2. Attach the air compressor hose to the opening at the
bottom of the gun handle. An optional 1/4" NPT
quick connector (MP2468) and coupler (MP2883)
can be used to attach the hose to the gun.
HOSE CONNECT ASSEMBLY FOR
MODEL AT121002AJ - 60 LBS
1. Attach the hose connector to the hopper using the
conduit nut.
2. Attach the material hose to the hose connector.
Attach the opposite end of the material hose to the
gun (See Figure 5).
NOTE:
DO NOT
cover the hole in the hose connector
for dry blasting. For use with liquids, slip the material
hose fully on the hose connector covering the hole.
3. Attach the air compressor hose to the opening at the
bottom of the gun handle. An optional 1/4" NPT quick
connector (MP2468) and coupler (MP2883) can be
used to attach the hose to the gun.
HOPPER AND HOSE CONNECT ASSEMBLY
FOR MODEL AT121102AJ - 120 LBS
1. Slide the wheel onto the axle and lightly hammer on
the wheel cap. Make sure the protruding hub on the
wheel is facing the hopper (See Figure 6). Repeat for
the opposite side.
2. Attach the hose connector to the hopper using the
conduit nut.
Figure 4 _ Model AT125102AJ - 30 LBS
Figure 6
_
Model AT121102AJ - 120 LBS
DO NOT COVER
THIS HOLE FOR
DRY BLASTING
ATTACH
AIR
HOSE
MATERIAL
HOSE
HOSE
CONNECTOR
