FT-395 Alta Girona Fountain
Assembly Instructions
Two people are recommended for the installation of this fountain!
Assemble your fountain on a level surface capable of holding a minimum of 1105 lbs with
an approximate 3 sq. ft. footprint (actual dimensions 21" Diam.).
Step 1 -
Position the basin (FT-395C) where the fountain is to be installed, ensuring that it
is level.
Step 2 -
Assemble the pump kit:
2a -
Using a hose clamp, connect the tubing to the pump outlet.
2b -
Place the stopper around the pump cord approximately 6" from the pump.
Step 3 -
Feed the pump cord through the hole and channel in the basin (FT-395C).
Step 4 -
FIRMLY press the stopper into the hole evenly.
4a - Note: Using the handle of a screwdriver or hammer works best to press the
stopper in place.
FT-395C (497 lbs)
40.5"W x 28"H
Step 5 -
Center the large disc (FT-395B) inside the basin (FT-395C), ensuring that it is centered
and level.
FT-395B (135 lbs)
34.5"W x 2.25"H
FT-300A (13 lbs)
11.5"W x 4"H
Step 6 -
Holding the water feature disc (FT-300A) over the large disc (FT-395B), fit the clear end
of the tubing assembly over the pipe protruding from the bottom of the water feature.
Step 7 -
Carefully place water feature disc (FT-300A) into the large disc (FT-395B) ensuring that it
is centered.
Step 8 -
Fill the fountain with water.
