CRANKSET - Rev. 04/ 06-2022
CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
6
L
FRAMES FOR
TRADITIONAL BRAKES
L
= 405 mm min.
FRAMES FOR
DISC BRAKES
L
= 410 mm min.
WARNING!
The stop chain ring of the pedal pivot must respect the dimensions
indicated in Fig.1.
These conditions are necessary to minimise the possibility of
abnormal tensions in the hand cranks. Such tensions could lead to
premature breaks and be the cause of accidents, physical injuries or
even death.
NOTE
Q-factor: 145.5 mm (nominal value).
WARNING!
Do not put washers between the pedal axle and hand crank as they
would give rise to abnormal tensions in the interface area. Such ten-
sions could lead to premature breaks and be the cause of accidents,
physical injuries or even death.
MIN. 11,5 mm
MIN. 17,5 mm
PEDAL THREAD
9/16x20 TPI
1
Min. 11,5 mm
Min. 17,5 mm
2.1 - PIVOT PEDAL COMPATIBILITY
3 - INTERFACE WITH THE FRAME
3.1 - MINIMUM CHAINSTAY LENGTH
