Page 32
Use and maintenance manual – Translation of
original Instruction. : 04 date 16/09/2021
Blade and anvil can be replaced separately. Do not worry about the blade positioning. It will put itself in the right position
after switching on the shear at the end of the replacement.
6.3 Problem solution
Number of short
beeps
Fault
Remedy
1 beep
Reduced battery capacity
Check if the battery capacity is low.
Recharge the battery.
3 repeated beeps Inefficient blade
Lubricate the blade (see par. 5.2).
4 repeated beeps Interrupted connection to the motor Contact an Authorized Service Point.
5 repeated beeps Shorted motor
Contact an Authorized Service Point.
Continuous sound Safety warning
Check whether the operator’s body is in contact with the shear
blade.
6.4 Special maintenance
Any special maintenance operation, such as the replacement of the gear motor or of the main boards, must be
carried out at an Authorized Service Point.
It is the Service Point authorized by the Manufacturer for repairing the products.
AUTHORIZED SERVICE POINT