Camon C500, Руководство по эксплуатации

Страница: 5 / 24

CAMON C500 Stump Grinder CAMON C500 Stump Grinder
CAMON-C500/11.11/2 CAMON-C500/11.11/3
1. Remove the machine from its crate.
2. Remove the handlebar securing pin - Part No
11159 (Diag No 1, Item No 1) .
3. Fit the handlebar with the securing pin and fit split
pins Part No 960200 (Diag No 1, Item No 2) .
4. Attach the brake cable (Diag No 2, Item No 1) and
adjust as necessary.
5. Connect the wiring harness by fitting eyelet
terminal to 6mm bolt above the on/off switch
and connect the male bullet to the black three-
way connector to the oil alert
(Diag No 3) .
6. Check engine oil level top up if necessary with
15w/40 oil.
7. Put unleaded fuel in the fuel tank.
8. The machine is now ready to be run in
accordance with the operating instructions.
Diag No 2 Diag No 3
Diag No 1
ASSEMBLY GUIDE
Assembly Instructions
The throttle cable clamp
may be fitted in this
position. If so, move
it to the position shown
in fig. 2 (below)
This is the correct
position for the
throttle cable clamp
The throttle cable needs to be passed through
this hole to ensure full throttle during operation
FIG 1
FIG 2
READ CAREFULLY!
ASSEMBLY GUIDE
Throttle Cable Clamp
IMPORTANT
!