Camon C500, Руководство по эксплуатации

Страница: 14 / 24

CAMON-C500/11.11/12 CAMON-C500/11.11/13
CAMON C500 Stump Grinder CAMON C500 Stump Grinder
SAFETY SAFETY
Before Starting the Engine
1. Review all of the safety decals that are placed on the machine for your safety and convenience. See
PARTS section for aid in locating all decals on the machine.
2. Make sure that all shields, guards, and curtains are in place, and are in good condition prior to operating
the machine.
3. Only responsible, properly instructed individuals should operate this machine. Inexperienced operators
must always be carefully supervised.
4. Check cutting wheel for damage or missing teeth, and replace as necessary.
5. Make sure that no-one is working on, underneath, or close to the machine before starting the engine or
beginning to move the machine. Make sure that the area is free of personnel.
6. Check stumps to be removed for embedded nails, wire, metal fence posts, and other metallic objects, and
for rocks or other buried impediments which may become dangerously thrown or cause unexpected
machine movements when hit by the cutting wheel.
7. Ensure that everyone in the vicinty is aware of the
DANGER ZONE associated with this machine
(see diagram right). You and they must avoid the
DANGER ZONE at all times when the machine is
in operation.
8. Make no alterations or modifications to your
CAMON Stump Grinder unless requested or
recommended by Tracmaster Ltd.
9. Check with the local utilities for the locations of
buried pipes and cables where applicable, before
operating the machine.
DANGER
ZONE
KEEP
EVERYONE
OUT OF
THIS AREA!
Normal Shutdown Procedure
In consideration of your own safety as well as that of others, you should always use the following normal
shutdown procedures before departing from the controls for any reason, including cleaning, servicing,
transporting, or inspecting the stump grinder. Never deviate from this procedure unless so instructed in this
manual or an emergency requires it.
1. Move the engine throttle to the “SLOW” position.
2. Release operator presence control.
A rotating cutting wheel is very DANGEROUS! Stand at controls and ensure that cutting
wheel comes to a complete stop before doing anything else.
3. Set park brake before leaving controls.
4. Turn the engine switch to the “OFF” position.
Emergency Shutdown Procedure
1. Immediate release of the operator presence control will automatically shut off the engine.
2. Be sure to allow all moving parts to come to a complete stop.
A rotating cutting wheel is very DANGEROUS! Stand at controls and ensure that cuttng
wheel comes to a complete stop before doing anything else.
3. Correct the emergency situation, and return to normal operation.
WARNING
!
WARNING
!