Camon C150, Руководство по эксплуатации

Страница: 7 / 16

CAMON Chipper Shredder
C150/0415
Page 7
Danger Points to Observe
The chipper shredder blades may continue to rotate silently after engine shut down.
Be sure the blades have stopped rotating before working on the machine.
The shredder grasps and pulls material down into the hopper with surprising speed.
Clear processed material regularly do not allow it to build up underneath the machine.
Gloves, if worn for shredding, should be large enough to slip off your hands if caught in the
material.
DO NOT wear rings, bracelets, watches or jewellery or any other items that could be caught in
the material and draw your hands into the shredder.
ALWAYS hold the material very lightly.
DO NOT use the machine with the discharge grille FULLY OPEN.
NEVER attempt to operate the machine without chipper chute and shredder hopper in place.
NEVER overload the machine.
NEVER stand in front of the chipper chute or attempt to look down the shredder hopper when
the machine is operating.
NEVER position the machine on a ledge higher or lower than the operator. Machine and operator
must be on the same level.
ALWAYS operate the machine a FULL throttle.
ALWAYS allow the machine to run at full speed for 2 minutes before switching off.
FAILURE TO OBSERVE THESE POINTS MAY RESULT IN PERSONAL INJURY.