background image

CAMON Chipper Shredder

C150/0415

 

Page 9

Risk Assessment

HAZARDS

RISK LEVEL ACTION NEEDED

General

The machine should only be used by trained 

operators.

Flying chippings

Medium

Wear protective clothing including helment, eye 
and ear protection, loose fitting gloves, and 
overalls.

Ensure there are no bystanders in the area of 
operation.

Machine moving whilst in 

operation

Low

Always ensure the machine is on firm, level 

ground.

Shredder mill clogging

Low

Never overfeed the shredder.  Allow the shredder 
mill to clear before introducing more material.

Clearing blocked grille

High

The machine must be switched off and the spark 

plug removed before attempting to clear any 
blockage.  Never reach inside with your hand, use 
a piece of wood to clear any blockages.

Burns, lacerations and 
other injuries by moving 

parts and branches

High

Only allow trained operators to use the machine.

Turn off the machine and remove the spark plug 

before carrying out any maintenance.

Never reach down into the in-feed chutes or up 

into the discharge grille.

Be careful of the hot exhaust.

Fire or irritant from fuel

High

Use correct fuel containers.

Follow regulations regarding transportation of 
fuel.

Do not spill fuel onto the outside of the machine.

Do not smoke while refuelling.

Turn off the fuel tap before transporting the 

machine.

Содержание C150

















Отзывы: