18.
21
www.camltomlin.com
FLOW INSTALLATION - CORNER
Mount door assembly onto rail
Using a hack saw, cut the door bumper and bumper seal to length and install onto glass. The bumper seal with the angled
lip must be applied to the handle side of the door panel with the flange facing inward.
Cut the bottom water guard to length so that it fits between the two vertical gaskets and install onto the bottom edge.
Ensure the flange faces inward.
Lift the door assembly on to the rail. As you lower the door, guide the bottom edge of the door panel into the slot of the
fixed panel bracket.
A
C
14
A
B
A
13
15
B
C
C
