15.
18
www.camltomlin.com
FLOW INSTALLATION - CORNER
Carefully slide the return panel (26) into the wall jamb as shown. Ensure that the panel is parallel to the edge of the base.
Adjust the return panel by sliding it in or out of the wall jamb until the hole in the panel lines up exactly with the hole in the
rail.
CAUTION:
Since the panel sits close to the edge of the base, use extreme caution to ensure that the panel stays in place
and does not get knocked off of the base until it is firmly fastened.
Install return panel
A
26
A
A
B
