PM 1000289 000 01
Device handbook SIRAX BT5200
17/32
7.1.5.2 Start value of Input
This screen allows the user to set the Start value of Input. Start value of Input can be set up to 80% of End value of Input.
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
A
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
A
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
INPUT
INPUT
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
*
A
INPUT x012
O/P 12 y012
A
A
INPUT
A
Pressing the “ Down” key will enter the “New/Change
Start value of Input edit” mode.
Pressing “ Up” key will confirm the present value as Start value of Input and advance to the Elbow functi-
on selection (section 7.1.5.3)
New / Change Start value of Input
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the second digit from 0 through to 4, the value will wrap
from 4 round to 0 depending on set value of End vale of Input.
Pressing the “ Up” key will advance the operation to the next digit and set the second digit, in this case to
“0”.
Enter New / Change Start value of Input, second digit entered, prompting for third digit. (*Denotes that digit
will be flashing).
Pressing the “ Down” key will scroll the value of the third digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End vale of Input.
Pressing the “ Up” key will advance the operation to the next digit and set the third digit, in this case to
“5”.
Enter New / Change Start value of Input, third digit entered, prompting for fourth digit. (* denotes that digit will
be flashing).
Pressing the “ Down” key will scroll the value of the fourth digit from 0 through to 9, the value will wrap
from 9 round to 0 depending on set value of End vale of Input.
Pressing the “ Up” key will advance the operation to the “New / Changed Start value of Input” and set the
fourth digit, in this case to “0”.
New/changed Start value of Input confirmed.
Pressing the “ Down” key will re-enter to the “New / Change Start value of Input edit” mode.
Pressing the “ Up” key will confirm New Start value of Input and advance to the Elbow function selection
(section 7.1.5.3).
