Camfil – Clean Air Solutions 13
12 Camfil – Clean Air Solutions
ENG
To configure a network (
enter the key
), click on the icon located
to the right of each button (
network
). When you click on it, the
application will take you to the
password entry screen
and when
you return from this screen, a loading icon will appear on the
corresponding button indicating that it is trying to connect with
the data entered.
If it connects, the icon to the left of the button will change to
a green background indicating that we are connected to that
network.
Otherwise, the equipment will continue trying to
reconnect until we indicate it to connect to another network or
we modify the connection data.
The device is capable of storing up to
5 known networks
.
Whenever it detects a known network it will try to connect to it
in order of signal strength, i.e. it will try to connect first to the
network with the strongest signal strength.
To select a network to connect to, simply click on the corresponding button and the equipment
will try to connect to it with the password it has configured. If no password is configured, it will
behave as if we had clicked on the arrow icon on the corresponding button, i.e. it will send us to
the password entry screen.
10 USE
The air purifier is used to clean indoor air by mechanically filtering, through highly efficient
filters. Development of the system is primary for expert users and installation companies for
offices, hospitals and schools.
11 DESIGN
The unit is a self-standing one-section design housing the filters, fan section and all electrical
connections. The machine is entirely constructed of aluminium and plastic parts and is therefore
environmentally friendly and recyclable.
12 CONSTITUENT STANDARD COMPONENTS
In its
standard version, the air purifier is supplied with the following components:
•
One City M Connect / City L Connect unit
•
Filters for the cho
sen purpose
•
Quick guide
•
Technical Manual.
•
Electrical connector
If anything is missing, or if you require further information about accessories, please
contact Camfil.
13 TRANSPORT AND UNPACKING
Remove the packaging carefully. If sharp objects are used to unpack the product, be careful not to
damage the machine’s cables and design finish. Take special care when handling the filters. See
the filter replacement section.
Check that the product has not been damaged during transport. Report any transport damage to
the carrier. Check also that the delivery is complete.
14 POSITIONING
The unit must always be positioned and used indoors only. Air outlets and intakes must not be
obstructed during use. Before putting the air purifier in operation, ensure there is sufficient space
(10 cm) around the outlet and inlet.
Procedure for moving the device is the following (only applicable for City L Connect):
1. Ensure that the breaking system of the wheels (two of them) is deactivated.
2. Move the equipment holding it at all times from the top.
3. Activate the breaking system of the wheels so as to prevent from undesired moving.
If desired, the wheels can be easily removed from the device. In this case, follow the
procedure below (only applicable for City L Connect):
1. Place the device on a smooth horizontal surface.
2. Unscrew each of the four screws holding each wheel with a cross slot screwdriver.
3. Place the equipment in its operating position.
15 ELECTRICAL CONNECTION
The unit comes from the factory ready for plugging in.
All routing of cables, etc., must be carried
out in accordance with the relevant regulations and by an appropriately qualified electrician. Any
alterations to the machine’s internal electrical systems must only be carried out by appropriately
qualified persons using equipment supplied by Camfil.
THE UNIT MUST ONLY BE CONNECTED TO THE NETWORK VOLTAGE STATED ON THE MACHINE
PLATE (IDENTIFICATION PLATE).
