6
From the Maintain
Turbine menu, a
user can change the
K-factor or select
a different turbine
meter.
The user can enter a
linear K-factor or a
multi-point calibra-
tion factor (1 to 12
points allowed).
Maintain Flow Run Menu
From the Maintain
Flow Run menu, a
user can change an
orifice plate size,
cone meter or
averaging pitot
tube parameters,
cone meter factors,
steam properties, or
gas composition.
Tasks will vary with
the flow calculation
method used.
Click Change Task
to select a new
maintenance task.
1
Select the task you
want to perform.
3
Click Save Changes to save the new
parameters to memory.
2
Enter new parameters in the fields
provided.
Or click on Copy From Current to load current
parameters.
4
Click Exit
Maintenance Mode
to resume live data
readings.
Click Change Task to
select a new turbine
meter or a new
maintenance task.
1
Select the task you
want to perform.
2
Select a new meter or enter a new
K-factor using the fields provided.
3
Click Save Changes to save
the new selections to memory.
4
Click Exit
Maintenance Mode
to resume live data
readings.
Maintain Turbine Menu