63
Firewall Settings
This screen enables users to set up the firewall. The WLAN Router provides basic
firewall functions, by filtering all the packets that enter the WLAN Router using a
set of rules. The rules are listed in sequential order--the lower the rule number,
the higher the priority the rule has.
Enable:
Click to enable or disable the firewall rule profile.
Name:
Type a descriptive name for the firewall rule profile.
Action:
Select whether to allow or deny packets that conform to the rule.
Source:
Defines the source of the incoming packet that the rule is applied to.
●
Interface:
Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start:
Type the start IP address that the rule is applied to.
●
IP Range End:
Type the end IP address that the rule is applied to.
Destination:
Defines the destination of the incoming packet that the rule is
applied to.
●
Interface:
Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start:
Type the start IP address that the rule is applied to.