64
●
IP Range End:
Type the end IP address that the rule is applied to.
●
Protocol:
Select the protocol (TCP, UDP, or ICMP) of the destination.
●
Port Range:
Select the port range.
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update information for the rule if the user has selected a listed
item and has made changes.
Delete:
Select a listed item and click
Delete
button to remove the entry from the
list.
New:
Click
“New”
to erase all fields and enter new information.
Priority Up:
Select a rule from the list and click
“Priority Up”
to increase the
priority of the rule.
Priority Down:
Select a rule from the list and click
“Priority Down”
to decrease the
priority of the rule.
Update Priority:
After increasing or decreasing the priority of a rule, click
“
Update
Priority
”
to save the changes.
Management
Management enables users to set up the SNMP and Remote Management
features.
SNMP (Simple Network Management Protocol)
This screen allows you to enable and configure SNMP (Simple Network
Management Protocol) on the router. Using SNMP, notification messages or SNMP
Traps (router status/device information) can be sent from the router to external
SNMP management stations/Trap Receivers for device monitoring purposes.
