22
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Colour
Calibrat-
ion
= Colour calibration
RAW - Off
R, G, B and W with maximum value 255
RAW - Adjust
(individual,
cross-mode
adjustment of
R, G, B, and
W with values
from 000 to
255 each)
Press middle encoder = switch between
R+G and B+W (colour)
Turn middle encoder = set value of R or
B
Press right encoder = one level higher in
the menu structure (ESC)
Turn right encoder = set value of G or W
Press left encoder = confirm and save
settings
Calibrated
Factory calibration of R, G, B and W
(across all modes). Select this setting for
the correct display of the colour tones
and presets in the standalone modes
CCT and Gel , as well as when controlling
CCT and the presets Gel via DMX.
Smart Calibrat-
ion
Merging Factory (Calibrated) and RAW
Calibration
Autolock = Automatic locking of
the controls
On
Automatic locking of the controls after
approximately 30 seconds of inactivity.
Display after operating attempt:
“Locked!”
Unlocking: Press the middle and right
encoder simultaneously for approx. 3
seconds
Off
Automatic locking of the controls is
disabled
Fan
= Fan setting
Car
Automatic fan control
Off
Deactivated fan with greatly reduced
brightness
Constant Low
Constantly low fan speed with reduced
brightness, if necessary
Constant
Medium
Constant average fan speed with
reduced brightness, if necessary
Constant High Constant high fan speed
Factory
Reset
= Reset to factory
settings (without
resetting the User
Colors and Loops)
Reset Now?
Reset to factory settings:
confirm with ENTER, cancel with ESC
UC/Loops
Reset
= Resetting the User
Colors and the Loops
to Factory Default
Reset User
Colors/Loops
Reset to factory settings:
confirm with ENTER, cancel with ESC
