INTRODUCTION
Congratulations on choosing the
Camec Elite Pro
®
EM305 caravan manoeuvring system. This has been
produced according to very high standards and has undergone careful quality control procedures.
B
y
simply
using the remote control handset you can move your caravan effortlessly into any position required
within operating guidelines. Soft start and soft stop technology allows you to manoeuvre your caravan
accurately without any shocks.
The caravan manoeuvring system consists of two 12V motor-power rollers, a 12V electronic control unit and a
remote control handset. To function, the motor-powered rollers must be engaged against the tyres of your
caravan. The
Camec Elite Pro
®
EM305 Caravan manoeuvring system is provided with an automatic engaging
system. By pushing two buttons on the remote control, both motor-powered rollers will be simply press
on the
tyre. Once this is done the manoeuvring system is ready for operation. The remote control will allow you to
move your caravan in any direction. You can even rotate the caravan on it’s own axis without moving forwards
or backwards
.
Before proceeding with installation and starting to use the manoeuvring system, please
read this manual very carefully and be aware of the safety instructions! The owner of the
caravan will always be responsible for correct use. Keep this manual inside your caravan for
future reference.
INTENDED USE
The
Camec Elite Pro
®
EM305 caravan manoeuvring system is suitable for single axle and double axle caravans.
Suitable only for L-profiled and U-profiled chassis with a chassis thickness between min. 2.8mm and max.
3.5mm.
Depending on the weight of the caravan, the manoeuvring system cannot overcome obstructions that are more
than about 2cm in height without assistance (please use wedges as a ramp).
The standard installation kit only provides parts for installing the caravan manoeuvring system within the
measurements given in Fig. 1
7
.
SPECIFICATIONS
Designation
12 Volt
DC
Operatio
vo
nal
ltage
Average current consumption
Maximum current consumption
Transmitting frequency remote control
Speed
Weight (
mo
2
se
tor
t)
30 Ampere
120 Ampere
868MHz
approx.
11cm
se
per
c.
approx. 33kg (exclusive battery)
Permissible overall Weight single axle (2 motors)
2000kg (1750kg on 18% gradient)
Permissible overall Weight double axle (2 motors) 2000kg (1750kg on 18% gradient)
Permissible overall Weight double axle (4 motors) 3000kg (2350kg on 18% gradient)
Minimum width (caravan/trailer)
Maximum width (caravan/trailer)
Maximum
tyre
width
Power source (battery)
1800mm
2500mm
205mm
LiFePO
4
: 12V, 20Ah (recommended
Camec Elite
Pro
®
EM305
)
Lead acid: 12V, 80Ah (min.)
INSTALLATION - SAFETY GUIDELINES
Read this user manual carefully before installation and use. Failure to comply with these
rules could result in serious injury or damage to property.
These symbols identify important safety precautions. They mean CAUTION! WARNING!
SAFETY FIRST! IMPORTANT INFORMATION!
Before starting installation under the caravan:
Check the towing load of your vehicle and the gross weight of your caravan in order to establish whether they
are designed for the additional weight. The manoeuvring system itself has a weight of about 33kg and a battery
has a weight of about 20-25kg.
Check the minimal installation dimensions of the manoeuvring system based on figure 1
7.
Ref:
ELITE
PRO
EM30
5
-
0814
-Rev.A.
CAMEC
ELITE
PRO
EM30
5
4
Camec Elite Pro
®
EM305
“More information https://www.caravansplus.com.au"