Pa
g.
1
8
18
- M
an
u
al c
od
e:
3
1
9
U
17
31
9
U
17
ve
r.
1
2
12
04/
2
0
10
9 © C
A
M
E c
an
ce
lli auto
m
ati
ci s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on r
ep
orte
d i
n th
is i
n
sta
lla
tio
n m
an
u
al a
re s
u
sc
ep
tib
le to
ch
an
g
e at a
ny ti
m
e a
n
d w
ith
ou
t o
b
lig
ati
on o
n C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. to n
otify u
se
rs.
ENGLISH
CLOSING ENDSTOP – RIGHTHAND GEARMOTOR – INSIDE VIEW
- turn the upper cam clockwise, until the micro switch is released.
- Secure the cam by tightening the lateral screws.
- Release the gearmotor and fully close the
gate leaf.
N.B. Always fi rst adjust the opening endstop and then the closing endstop
Warning: the upper cam of the operator’s endstop assembly is calibrated for gate widths of between 1.2 m to 2.2 m.
- turn the upper cam clockwise, until the micro-switch is released.
RIGHTHAND GEARMOTOR – INSIDE VIEW
If the gate leaf measures less than 1.2 m, you must turn the upper cam upside down and then set the microswitch.
- Remove the screws from the upper cam and turn it upsidedown.
- Release the gearmotor and fully close the
gate leaf.
- Secure the cam by tightening the lateral screws.
