CAME ZA3P, Руководство по установке

Страница: 23 / 48

2 C1 CX B1 B2
FC1 FA2 FC2
S 1 2 3 3P 4 5 7 2 C1 CX B1 B2
2 FC1 FA2 FC2 FA1
>5”
p.
11
- M
an
u
al
FA
0
1
07
9
-E
N
- 1
0
/2
0
2
0 © C
A
M
E S
.p.
A
. - T
ra
n
sl
ati
on of th
e o
rig
in
al
in
str
u
cti
on
s
Totally cancelling the memory
Simultaneously keep pressed buttons CH1 and CH2 for over fi ve seconds; when the LED stays lit, all of the radio control will
be cancelled.
ENABLING THE RADIO CONTROL
Possible connection to a second operator that can
be activated from the second channel on the radio
circuit (N.O. contact).
Contact rated for: 5A-24 V DC
Connect the RG58 antenna-cableto the corresponding
terminals.
Antenna and AF radiofrequency card
Fit the radio-frequency card intothe slot on the control
board AFTER CUTTING OFF THE MAINS POWER SUPPLY.
N.B.: The control board recognizes the radiofrequency card
only when it is powered up.
Memorization (max. 25 different transmitters)
CH1 = Channel for direct commands to a features of the gearmotor's control board
("open only / " open-close-invert" command or "open-stop-close-stop",
depending on the selection made on DIP-switches 2 and 3).
CH2 = Channel for direct command to an accessory device connected to B1-B2.
Do the same with the CH2 button, and associated it to another of the transmitter's
buttons.
Keep the CH1 button pressed on the control board (the LED will fl ash), send the
code by pressing the transmitter's button, the LED will stay on to confi rm that the
data has been saved.