manualshive.com logo in svg

CAME Wi-Fi PLX V, Руководство по эксплуатации и установке, Страница: 28 / 32

Поделиться
Скачать
CAME Wi-Fi PLX V Скачать руководство пользователя страница 28

Page 

28

  - Manual 

 - FA01792-EN

  - 10/2022 © CAME S.p.A.   - The contents of this manual may be changed at any time and without notice.  - Translation of the original instructions

DOOR STATUS function

OPEN GATE and GATE STATUS function

AUTOMATIC DOOR RELEASE function

> 3s

> 5s

Use this function to view the current door status (open/closed) 
via the LED on the 

 button.

 The system must be correctly set up.

 See [LED STATUS KEY]

 The function is active during communication with the 

outside.

The open gate function is used to activate the open/close gate 
function and view the gate status (open/closed) via the LED on 
the 

 button.

 The function must be activated during system 

programming.

Press and hold the 

 button for more than 3 seconds to send 

an open or close gate command.

 The DOOR STATUS function is active by default. The 

OPEN GATE/GATE STATUS function must be correctly 
confi gured. The two functions cannot both be active at the 
same time.

This function allows you to automatically open the entrance 
when you ring the bell from the entry panel. Communication is 
not activated and the call ends automatically. It is recommended 
for professional practices.

 The function is available by default. It can be removed 

during system programming.

Press and hold the 

 button for more than 5 seconds to 

activate or deactivate the function.

 The 

 LED switches on to indicate that the function 

is active.

Содержание Wi-Fi PLX V

































Отзывы:

Нет отзывов