CAME SADRIN 205, Руководство по установке

Страница: 9 / 10

FA00526-EN – ver. 3.3.1 – 12/2016
9
5. CABLES & CABLING
The wiring must be done using two separate cables:
o
The first (type shielded 0.5 mm ² minimum) supplies the barrier and allows the transmission of
the alarm signal and the tamper.
o
The second (type shielded 0.22 mm ² minimum) is a cable that allows the transmission of the
synchronization signal between TX and RX.
N.B.
The shield of this cable must be connected to the negative of 13.8 VDC to all columns.
6. TECHNICAL CHARACTERISTICS
MODEL SADRIN 205 SADRIN 410 SADRIN 615 SADRIN 820
Max range outdoor
Blak 15m; White 5m
Sinchronism
wired
Dual beam optical
Yes with 35mm lenses in AND
Max configuration
2TX+2RX 4TX+4RX 6TX+6RX 8TX+8RX
Beam operating
Parallel
Supply
13,8 Vdc
Consumption (tx+rx)
60mA 90mA 120mA 150mA
Optional heaters
Up to -50°C, 12Vdc
From 560mA to 3920mA tx + rx)
Alarm output
Free contact relay (on RX side)
Tamper output
On both column
Protection degree
IP54
Dimension
25mm x 22 mm from 500 to 4000mm
Weight per column
250g 500g 750g 1000g
Cable 12Vdc