Page
9
- Manual
FA01357-
EN
- 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Function
Descripton (
the default values appear with a black backdrop)
F 9
OUT4 command duration.
See [ F 6 ].
F 10
CRP address.
Assigning a univocal logic address for managing the receiver via CRP.
[ ……
] window
F 11
RS485 serial bus speed
. To set the speed on the COM port.
[ ] window 1200 Baud; [ ] 2400 Baud; [ ] 4800 Baud; [ ] 9600 Baud; [ ] 14400
Baud; [ ] 19200 Baud; [ ] 38400 Baud; [ ] 57600 Baud; [ ] 115200 Baud.
F 12
Setting the clock.
See detail in the corresponding chapter. It only appears when the
SIPA06 card is fitted.
F 13
Store in Memory Roll.
To save the settings of stored users.
[ ]; [ ] Store.
F 14
Copy from Memory Roll.
To retrieve stored settings and users.
[ ]; [ ] Copy.
F 15
Rolling Code store mode.
See detail in corresponding chapter.
F 16
PIN.
See detail in corresponding chapter.
U 1
Store users.
See detail in corresponding chapter.
U 2
Delete users.
See detail in corresponding chapter.
U 3
Delete all users.
See detail in corresponding chapter.
U 4
Code Decoding
. For choosing the type of receiving control code:
[ ] All series.
[ ] Only Rolling Code series.
[ ] Only TWIN series
[ ] Keypad.
[ ] Transponder.
When you select a radio code, all saved transmitters will automatically be deleted.
• The TWIN coding lets you save multiple users with the same key (Key block).
A 4
Reset.
To restore all default parameters.
[ ]; [ ] Reset.
H 1
Firmware version.
Page
9
- Manual
FA01357-
EN
- 07/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructi
ons
