p.
13
- Manual
FA01313-EN
- 02/2019 - © C
AME S.p.A. - The contents of this manual may change, at any time, and without notice. - Original instructions
1 - Cut the slot cover profiles of the same size as the boom slot minus 10 millimeters.
2 - Insert the slot cover profiles in the appropriate grooves on both sides of the boom.
3 - Fit the rubber terminal cap into the corresponding housing
4 - Insert the anti-impact rubber profile into the groove, making it fit with the end cap.
5 - Cut the excess part of the profile, letting it protrude of 7 millimetres.
6 - Insert the end cap of the rubber profile into the groove of the boom closing cap. Use the screws to fasten the boom end cap.
7 - Fit the anti-shearing protective cover onto the boom-attachment cover and fasten it using the screws supplied.
⚠
1
2
3
4
5
6
7
Choice of balancing spring and fastening hole
Spring code (colour)
001G02040 Ø 40 mm (yellow)
001G04060 Ø 50 mm (green)
Hole to which fasten the spring
A
B
A
B
Passage width clearance (m)
from 1.5 to 1.75
from 1.75 to 2.25
from 2.25 to 2.75.
from 2.75 to 3.75.
Boom means the boom complete with slot cover, cap and rubber profile.
A
B
