CAME FA7024CB, Руководство по установке, Страница: 52 / 128

Page
20
- Manual
FA01047-EN
- 08/2018 - © C
AME S.p.A. - Original instructions
F23 Delay in opening time
After an opening command, the M1 gearmotor starts delayed. The delay time is settable between
one and ten seconds.
0 = Deactivated /.../ 2 = 2 seconds ( default ) /.../ 10 = 10 seconds
F24 Closing delay time
After either a closing command or an automatic closing, the M2 gearmotor starts delayed. The
delay time is adjustable between one and five seconds.
0 = Deactivated /.../ 5 = 5 seconds ( default ) /.../ 25 = 25 seconds
F26 Closing thrust time
After an opening or closing command, the gearmotor thrusts inward for an adjustable time
between one and two seconds.
1 = 1 second ( default ) / 2 = 2 seconds
F27 Lock time
After an opening or closing command, the electric lock releases for an adjustable time between
one and four seconds.
1 = 1 second ( default ) /.../ 4 = 4 seconds
F28 Gate travel speed
Setting the gate's opening and closing speeds, calculated as a percentage.
60 = 60% of the maximum speed /…/ 100 = 100% of the maximum speed ( default )

For FA7024CB gearmotors, the minimum speed is 50.
F30 Slow-down speed
Setting the gate's opening and closing slow-down speed, calculated as a percentage.
10 = 10% of the maximum speed /…/ 50 = 50% of the maximum speed ( default ) /.../ 60 =
60% of the maximum speed

For FA7024CB gearmotors, the minimum speed is 30.
F33 Calibration speed
Setting the gearmotors' speeds during calibration, calculated as a percentage.
20 = 20% of the maximum speed /… / 50 = 50% of the maximum speed ( default ) /.../ 60 =
60% of the maximum speed
F34 Travel sensitivity
Adjusting obstruction detection sensitivity during gate travel.
10 = Maximum sensitivity /…/ 100 = Minimum sensitivity ( default )
F35 Slow-down sensitivity
Adjusting obstruction detection sensitivity during slow-down.
10 = Maximum sensitivity /…/ 100 = Minimum sensitivity ( default )
F36
Adjusting the partial
opening
Adjustment as a percentage of total travel, during gate opening.
10 = 10% of the travel /…/ 40 = 40% of the travel ( default ) /... / 80 = 80% of the travel
F37
Opening slow-down
point for the M1 motor
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M1
during opening.

This function only appears if the Encoder function is activated.
1 = 1% of the travel /…/ 25 = 25% of the travel ( default ) /…/ 60 = 60% of the travel
F38
Closing slow-down
point of the M1 motor
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M1
during closing.

This function only appears if the Encoder function is activated.
1 = 1% of the travel /…/ 25 = 25% of the travel ( default ) /…/ 60 = 60% of the travel
F39
Opening approach
point of the M1 motor
Adjusting as a percentage of the total travel, the gearmotor M1 opening approach starting point.
 This function only appears if the Encoder function is activated.
1 = 1% of the travel /…/ 10 = 10% of the travel ( default )
F40
Closing approach
point for motor M1
Adjusting as a percentage of the total travel, the gearmotor M1 closing approach starting point.
 This function only appears if the Encoder function is activated.
1
= 1% of the travel /…/
10
= 10% of the travel (
default
)
F41
Opening slow-down
point for the M2 motor
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M2
during opening.
 This function only appears if the Encoder function is activated.
1
= 1% of the travel /…/
25
= 25% of the travel (
default
) /…/
60
= 60% of the travel
F42
Closing slow-down
point of the M2 motor
Adjustment as a percentage of total travel, of the beginning slow-down point of gearmotor M2
during closing.

This function only appears if the Encoder function is activated.
1
= 1% of the travel /…/
25
= 25% of the travel (
default
) /…/
60
= 60% of the travel