CAME FA7024CB, Руководство по установке, Страница: 48 / 128

DELTA
10 11 E 5
1 2 3P 7 10 TS 2 CX CY A B GND
TX
+
+ - NO C
-
NC
DELTA-S DIR
10 11 E 5
1 2 3P 7 10 TS 2 CX CY
TX 2 TX 2 10 2 TX C
-
+
-
NC
A B GND
DFWN
1 2 3P 7 10 TS 2 CX CY A B GND S1 GND A B
10 11 E 5 M1 N1 ENC1
24 0
1 2 3P 7 10 TS 2 CX CY A B GND S1 GND A B
10 11 E 5
24 0
Page
16
- Manual
FA01047-EN
- 08/2018 - © C
AME S.p.A. - Original instructions
SAFETY DEVICES
Photocells
Configure contact CX or CY (NC), safety input for photocells.
See CX input functions (Function F2) or CY (Function F3) in:
- C1 reopening during closing. When the gate is closing, opening the contact triggers the inversion of movement until the gate is fully
open again;
- C2 reclosing during opening. When the gate is opening, opening the contact triggers the inversion of movement until the gate is
completely closed.
- C3 partial stop. Stopping of the gate, if it is moving, with consequent automatic closing (if the automatic closing function has been
entered);
- C4 obstruction wait. Gate stops, if it is moving, and once the obstruction is removed, it resumes its movement.

If contacts CX and CY are not used they should be deactivated during programming.
Sensitive Safety Edges
Configure contact CX or CY (NC), safety input for sensitive safety-edges.
See CX input functions (Function F2) or CY (Function F3) in:
- C7 reopening during closing. When the gate is closing, opening the contact triggers the inversion of movement until the gate is fully
open again;
- C8 reclosing during opening. When the gate is opening, opening the contact triggers the inversion of movement until the gate is fully
closed.
 If contacts CX and CY are not used they should be deactivated during programming.
DFWN with DFI card for controlling the
connections