CAME BX Series, Руководство по установке

Страница: 49 / 112

p.
21
- M
anu
al
FA
0
0
9
4
5
-E
N
- 0
1/
2
0
18 - © C
A
M
E S
.p
.A
. - T
ransla
te
d o
riginal inst
ru
ct
io
ns
F38
Closing slow-down
point
Percentage adjustment of the total door travel, from the closing slow-down starting point.

This function only appears when functions F11 and F30 are activated.
5 = 5% of the gate travel /... / 15 = 15% of gate travel ( default ) /... / 30 = 30% of gate travel
F48
Maneuver thrust
activation
Greater pushing torque that activates during the operator's beginning opening and closing phases.
OFF ( default ) / ON
F49
Managing the serial
connection
To enable the paired operating mode or the CRP (Came Remote Protocol).
OFF ( default ) / 1 = Paired / 3 = CRP
F50 Saving data
Saving users and saved settings in memory roll.

This function only appears if a memory roll has been fi tted into the control board.
OFF ( default ) / ON
F51 Uploading date
Uploading data saved in memory roll.

This function only appears if a memory roll has been fi tted into the control board.
OFF ( default ) / ON
F52
Transferring
parameters in paired
mode
Uploading settings from Master to Slave.

This appears only if function F49 is set to Paired.
OFF ( default ) / ON
F54 Opening direction
For setting the gate opening direction.
0 = Opening left ( default ) / 1 = Opening right
F56 Peripheral number
To set the peripheral number from 1 to 255 for each control board when a system is fi tted with several
operators and features the CRP (Came Remote Protocol) connection system.
1 ----> 255
F63 COM speed
For setting the communication speed used in the CRP (Came Remote Protocol) connection system.
0 = 1200 Baud / 1 = 2400 Baud / 2 = 4800 Baud / 3 = 9600 Baud / 4 = 14400 Baud / 5 = 19200 Baud
/ 6 = 38400 Baud ( default ) / 7 = 57600 Baud / 8 = 115200 Baud
F65
Wireless input
RIO-EDGE [T1]
RIO-EDGE wireless safety device associated to a function of choice among those available: P0= stop gate and
exclude any automatic closing; to resume movement, use the control device, P7 = reopening during closing,
P8 = reclosing during opening.
For programming, see the instructions that come with the accessory.

This function only appears if the RIOCN8WS card is plugged into the control board.
OFF (default) / P0 = P0 / P7 = P7 / P8 = P8
F66
Wireless input
RIO-EDGE [T2]
RIO-EDGE wireless safety device associated to a function of choice among those available: P0= stop gate and
exclude any automatic closing; to resume movement, use the control device, P7 = reopening during closing,
P8 = reclosing during opening.
For programming, see the instructions that come with the accessory.

This function only appears if the RIOCN8WS card is plugged into the control board.
OFF (default) / P0 = P0 / P7 = P7 / P8 = P8
F67
Wireless input
RIO-CELL [T1]
RIO-CELL is associated to any function chosen among those available: P1 = reopening during closing; P2 =
reclosing during opening; P3 = partial stop; P4 = obstruction wait.
For programming, see the instructions that come with the accessory.

This function only appears if the RIOCN8WS card is plugged into the control board.

The P3 function appears only if the F19 function is activated.
OFF (default) / P1 = P1 / P2 = P2 / P3 = P3 / P4 = P4
F68
Wireless input
RIO-CELL [T2]
RIO-CELL is associated to any function chosen among those available: P1 = reopening during closing; P2 =
reclosing during opening; P3 = partial stop; P4 = obstruction wait.
For programming, see the instructions that come with the accessory.

This function only appears if the RIOCN8WS card is plugged into the control board.

The P3 function appears only if the F19 function is activated.
OFF (default) / P1 = P1 / P2 = P2 / P3 = P3 / P4 = P4
F71 Partial opening time
After an opening command from the button connected to 2-3P, the gate opens for an adjustable time of
between fi ve seconds and 40 seconds.

This function only appears if function F11 is deactivated.
5 = 5 Seconds ( default ) /... / 40 = 40 Seconds