Packing List
Reading Tips
Main gimbal body x 1set
Battery Charger
Gimbal Handle x1
Quick Release Plate x1
1/4”Camera Screw x1
Euro travel adapter
Symbols :
Matters Need Attention
Lead to the Related Information Page
3
1. Loosen the adjustable screw on the fixed plate, to balance the camera (left or right).
2. When the proper balance is achieved, the camera will stay level after you remove your hands.
3. Tighten the screw.
Step 2: Balancing the Roll Axis
1. Position the camera at an angle (Attention: within the lens at limited range), loosen and adjust the vertical
screw.
2. When proper balance is achieved, you can rotate the camera to any angle and it will stay in that position.
3. Tighten the screw.
Steps 3:
Balancing center of gravity of the camera
Screw for Vertical Balance
Vertical Adjustable Screw
Fixed Plate
Roll Adjustable Screw
Pitch Adjustable Screw
Fixed
Plate
6