2
Contents
Disclaimers and Warnings
1
Gimbal description
1
Contents
2
Packing List
3
Reading Tips
3
Handle Installation
4
Camera Instructions
4
Battery Preparation
5
Balancing Gimbal
Balancing the Pitch Axis
5
Balancing the Roll Axis
6
Balancing Center of the Gravity of the Camera
6
Balancing the yaw Axis
7
How to use the gimbal correctly
Schematic Diagram of all the Axis Limited Angles
7
Function Instructions
8
How to use gimbal working mode button
8
Maintenance
8
User-defined gimbal each axis stable position
7
After the balance, you need rotate it to ensure the Pitch motor does not get stuck. If the vertical
balance needs any necessary adjustment, you may need to balance the pitch axis fore and aft until
the camera stays level at any pitch angle.
1. Loosen the adjustable screw on the Yaw axis handle,then adjust the bracket position (fore or aft) on the
adjustment lever.
2. When proper balance is achieved, you can rotate the camera to any yaw angle and it will stay in that position.
3. Tighten the screw then the balance is complete.
Step 4:
Balancing the Yaw Axis
7
1. Schematic Diagram of all the Axis Limited Angles
How to use the gimbal correctly
2. Customizable axis position
Setting method: User can set the gimbal’s customized home position by holding camera
frame at desired position for 3 seconds. Gimbal will automatically record
the revised position as the new starting point of the axial.
Do not go beyond the limited angles when using, otherwise the gimbal will be broken.
Yaw Axis
Yaw Adjustable Screw
Adjustment Lever
Bracket
200°
90°
340°
65°