Page
24
- Manual
FB01263 -EN
- 12/2018 - © C
AME S.p.A. - The cont
ents of this manual may be changed, at any time, and without notice. - T
ranslation of the original instructions
Restore preset settings
Set slave mode
Restart application
Reboot device
Home
Back
Info
19:02
Thursday
01 Feb 2018
The factory settings require that the indoor receiver operate in "master" mode. If the system features
several indoor receivers, that answer the same call within a home, only one of these must operate in "mas-
ter" mode. The others must operate in "slave" mode.
C
Touch the button to set the indoor receiver to "slave" mode.
D
Touch the button to return all the local settings to the default factory settings.
(administrator password required;
the default password is 112233).
A
Touch the button to reboot the
indoor receiver.
B
Touch the button to reboot only
the application that runs the indoor
receiver.
Maintenance
A
B
C
D
