2
1
Page
18
- Manual
FB01263 -EN
- 12/2018 - © C
AME S.p.A. - The cont
ents of this manual may be changed, at any time, and without notice. - T
ranslation of the original instructions
Quick commands
Video recording
Manual programming
Send SN
Multimedia
Backdrops
Configuration X2
CAME Connect
IP video cameras
Network
Configuring the user interface
Advanced settings
Automatic door opener
Tones
Credentials
Display
Home
Home
Home
Back
Back
Back
Info
Info
Info
19:02
Thursday
01 Feb 2018
19:02
Thursday
01 Feb 2018
19:02
Thursday
01 Feb 2018
This section requires specific
know-how in operating the vid-
eo-intercom system. Wrong set-
tings may cause partial or even
total malfunctions; that is why
the editing of some parameters
is allowed only after entering the
installer password; the default
password is 112233).
Advanced settings
Accessing the list of advanced set-
tings.
Select the first item on the list.
A
This button is for sending the
SN (serial number) to the Pcs/Xip
software during the programming
steps.
B
This button takes you to manual
programming of the device.
The complete manual pro-
gramming procedure for the call
is printed in the literature that is
issued with the indoor receivers.
Configuration X2
A
B
